Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Minors must not be allowed to use the battery tool. Use is reserved for qualified specialists.
The electric power tool is not suitable for continuous operation
A short pause is advisable after 15 minutes of use.
max.
The device must be serviced by the manufacturer after 20,000 cycles at the latest.
20.000 x
1.3.
Definition of terms
The term "electric power tool" used in the operating manual and the safety instructions refers to electric power tools operated with mains
voltage (with a power cable) or to battery-operated power tools (without a power cable) and their battery packs and charging units.
1.4
Intended use
Use the electric power tool and any insertion tools, etc., according to these instructions. Take into account the working conditions
and the activity to be performed. Use of the electric power tools for operations different from those intended could result in a
dangerous situation.
2.
General safety information
Read all safety information, instructions, illustrations and technical data supplied with the electric
power tool.
Failure to observe the following instructions may result in electric shock, fire and/or serious injury.
Save all safety information and instructions for the future..
2.1.
Work area safety
Keep your work area clean and well lit (> 400lux). Cluttered and dark work areas can lead to accidents.
Never work with the electric power tool in an explosive environment in the presence of flammable liquids, gases or dust. Electric
power tools create sparks that may ignite the dust or vapors.
Keep children and other persons away while using the power tool. Distractions can cause you to lose control of the electric power tool.
Use this device only for its intended purpose. The electric power tool may only be operated by specialists (aged > 16); this
operating manual must be kept accessible at all times during the entire service life of the device.
The operator must:
■ have read and understood the operating manual and the safety instructions;
■ ensure that the technical performance specifications are observed;
■ make sure that no persons are located in the danger area of the electric power tool;
■ examine the electric power tool for damage and defects before use. Use of the tool is strictly prohibited in
the event of any identified defects or damage.
The electric power tool may only be operated manually while making sure that both the start/stop switch and the reset button
are kept within reach and can be activated in the event of an emergency.
Stationary use of the electric power tool is prohibited - it must not be parked on the floor for use and not clamped in a clamping
device.
2.2.
Electrical safety
The electric power tool plug must match the outlet. The plug must not be modified in any way. Do not use adapter plugs with
grounded power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
Avoid body contact with grounded surfaces such as pipes, radiators, cookers and refrigerators. There is an increased risk of
electric shock if your body is grounded.
10
Safety and Maintenance Instructions
Publicidad
Tabla de contenido
