Venga VG COG 3050 Manual De Instrucciones página 4

Never move the appliance by pulling the cord. Make sure the
❑
cord cannot get caught in any way. Do not wind the cord around
the appliance and do not bend it.
Stand the appliance on a table or flat surface.
❑
Make sure the appliance has cooled down before cleaning and
❑
storing it.
Make sure the cord never comes into contact with the hot parts
❑
of the appliance. Never use the appliance near hot surfaces.
The temperature of the accessible surfaces may be very high
❑
when the appliance is in use. Make sure not to touch these hot
parts of the appliance.
Make sure the appliance never comes into contact with
❑
inflammable materials, such as curtains, cloth, etc. when it is
in use, as a fire might occur.
Be careful not to scratch the special coating of the baking
❑
plates, as you might get little pieces of this coating into the food.
Use a classical wooden spatula or a heat-resistant plastic one.
Always unplug the appliance when it is not in use, especially
❑
since it is not equipped with an on-off switch.
Only use the appliance for food that is supposed to be cooked.
❑
Your appliance must never be switched on through an external
❑
timer or any kind of separate remote control system.
Please note: Should the symbol be indicated on a certain
❑
surface, you need to be careful when handling the product.
This symbol means: CAUTION, this surface may get very hot
during use.
The symbol is always put on the surface with the highest
❑
temperature, however the other metallic or non-metallic
surfaces can also become very hot during use and it is
therefore advisable to always handle them with care and if
possible with the help of isothermal gloves or other thermal
protection. In case of doubt concerning the temperature of
a certain surface it is always preferable to protect oneself.
(*) Competent qualified electrician: after-sales department of the
producer or importer or any person who is qualified, approved and
VG COG 3050 4