Venga VG HA 3000 Manual De Instrucciones página 9

Only use the appliance for the preparation of food.
❑
It is imperative to keep the appliance clean at all times, as it
❑
comes into contact with food.
Do not clean the accessories with water or dishwasher
❑
programs exceeding 60°C to prevent deformation or damage.
Do not touch the blades, hold them by the plastic holder only.
❑
Wait until moving parts have stopped moving before you
❑
remove the parts from the appliance.
Never move the appliance by pulling the power cord. Make
❑
sure the power cord cannot get caught in any way. Do not wind
the power cord around the appliance and do not bend it.
Do not use the appliance near hot surfaces.
❑
Never switch on the appliance through an external timer or any
❑
kind of separate remote control system.
The safety system prevents a sudden increase in speed when
❑
the temperature is above 50°C.
Never put any objects into the bowl while the appliance is in
❑
use (cutlery, pushers, spatulas, etc.)
Never move the appliance or its bowl when in use.
❑
When in use, never open the lid to add food or liquids. Only
❑
use the feeding lid cap and be careful for splashes.
Do not overfill! The amount of food should not exceed the
❑
maximum level marked on the inside of the bowl.
After use, switch off the appliance and unplug it.
❑
If the blade is blocked, switch off and unplug the appliance
❑
before opening the bowl lid.
This device is not suitable for permanent use. It is not designed
❑
for professional use. Therefore, you should take breaks
between the preparation of several dishes.
CAUTION: The
❑
should be careful when handling the product because this
surface may get very hot during use.
(*) Competent and qualified service: after-sales department of the
producer or importer or any person who is qualified, approved
and competent to perform this kind of repairs in order to avoid all
danger. In case of need you should return the appliance to this
service.
symbol indicated on a surface means you
9 VG HA 3000