BEFORE USING YOUR APPLIANCE
Before using your Reversible Grill/Griddle for the first time, please follow the instructions
below:
Remove any stickers from the product
DO NOT IMMERSE TEMPERATURE CONTROLLER IN WATER.
Clean the ceramic non-stick surfaces
Make sure the controller is not inserted into the unit and wash the cooking plate,
drip pan and base with a soft sponge with hot, soapy water. Rinse and dry them
well.
Place the drip pan and cooking plate(with Grill side up)back in the base.
Set the temperature control to the position "off" and insert the controller into the
unit. If the controller is not completely inserted, abnormal heating may occur,
resulting in accident or damage.
To condition the cooking surface, plug the appliance into the appropriate
electrical outlet. Turn the knob counter-clockwise to select a low temperature
setting. The red indicator light will illuminate. Allow the unit to pre-heat until the
orange ready light goes off indicating that the selected cooking temperature has
been reached.
Wipe a small amount of butter or margarine onto the cooking surface, spread
slightly and wipe away any excess.
Wait for the unit to cool, remove the temperature controller and flip the plate(this
time the Griddle side should be up).
NOTE: When using the unit for the first time, you may notice a finesmoke haze coming out
from the unit. This is normal. It is due to the initial heating of internal components. Your
Reversible Grill/Griddle is now ready to use and it will not be necessary to condition it again.
HOW TO USE THE GRILL
1.
Place the drip pan correctly in the base as illustrated below (see Figure 1).
VG GR 3010
6