Venga VG IKP 3000 Manual De Instrucciones página 7

TROUBLESHOOTING
TROUBLE
Power indicator lit
off
Power off
automatically
LED shows E0
LED shows E1
LED shows E2
LED shows E3
LED shows E4
LED shows E5
LED shows E6
LED shows E7
POTENTIAL CAUSES
Power cord is not
connected
1. Spare parts over heat
2. No operation for two
hours
3. air intake and/or outlet
is jammed
No pot or pot too small
Voltage is too low
Voltage is too high
Surface temperature
sensor open circuit or
short circuit
Short circuit
Pot without water or dry
Overheat
Pot base not flat
RESOLUTION
Please ensure the plug inserted
into the socket
1. Restart the appliance
2. Please return it to a service
point for repair
3. Remove all objects blocking
both air supply and water supply
Put the suitable pot on the
surface of the cooker
Please ensure 88V < Voltage
<270V
Please ensure 88V < Voltage
<270V
Return it to the service centre for
checking and repairing
Return it to the service centre for
checking and repairing
Start again after the temperature
cool down (make sure the pot
contains water)
Please check if the air intake and
outlet are jammed. If not, please
return the cooker to the service
centre for checking and
repairing
Please use the suitable pot
7 VG IKP 3000