Cleaning And Maintenance; Problem Resolution; Control Panel - Create WINECOOLER RETRO M Manual De Usuario

1. On/off button
2. Light button
3. Screen
4. Temperature increase button
5. Temperature decrease button
To minimize energy consumption, make sure you respect the filling capacity of your wine-
cooler: 15 standard size 75cl bottles without shelves and 12 bottles with shelves.
• Cleaning your winecooler:
• Unplug the winecooler and remove all the bottles.
• Clean the exterior of the unit with hot water and a mild detergent or soap.
• Remove the water tank at the bottom of the unit, then wash it.
• Transport your winecooler:
• Remove all the bottles and unplug it.
• Tape down all loose parts inside your winecooler.
• Rotate the legs to adjust their height to the minimum to avoid damage.
• Squeeze the door to keep it closed and never lift the winecooler by the door.
• Be sure to keep the winecooler upright during transport.
TROUBLE
The winecooler doesn't work.
The winecooler is not cold
enough.
The winecooler is in constant
operation.
The light doesn't work.

CONTROL PANEL

1

CLEANING AND MAINTENANCE

PROBLEM RESOLUTION

POSSIBLE CAUSE AND SOLUTIONS
She's not connected.
The circuit breaker has tripped or the fuse is bad.
Check if the outlet is powered by connecting another electrical device.
Make sure there is not too much in the winecooler.
Check temperature setting.
A high room temperature may require setting the winecooler to a cooler
temperature.
The door is opened too often.
The door is not completely closed.
The door seal is not positioned correctly.
There is not enough space around the winecooler to allow for ventila-
tion.
The ambient temperature is higher than the maximum allowed.
A large number of bottles inside the winecooler.
The door is opened too often.
The door is not completely closed.
The temperature control is not calibrated correctly.
The door seal is not positioned correctly.
The winecooler is not plugged in.
The circuit breaker has tripped or a fuse has blown.
LED lighting is out of order.
The light button is set to "OFF".
2 3 4 5
E NG L I SH
9