VIA P4M800 Pro Guia De Inicio Rapido página 12

BIOS Setup
When you start up the computer for the first time you need to enter the BIOS CMOS Setup Utility.
Power on the computer and press <Del> key during POST (Power On Self Test). The BIOS CMOS
SETUP UTILITY opens as shown below:
Select and enter "Load Optimized Defaults" page. This page loads the factory settings for optimal
system performance. Follow the simple on-screen instructions to complete this procedure. Press
"ESC" to exit and select "Save & Exit Setup" to continue to boot.
For more information regarding BIOS settings refer to the complete manual in
the bundled CD.
12
4. BIOS
< CMOS Setup Utility>