VIA P4M800 Pro Guia De Inicio Rapido página 6

Before assembling the mainboard into the PC case we recommend you to do the following:
1. CPU Installation
2. DDR2 Memory Insertion
After the mainboard is fitted into the case, you may
3. Install Add-on VGA or PCI cards
4. Connect the internal cables and wires
5. Connect your external peripherals to the rear I/O port
Always have the power supply unplugged and powered off when
inserting and removing devices within the computer chassis.
3.1 CPU Installation
1
Step 1
Open load plate ( A ) , DO NOT touch socket
contacts ( B ).
When sending the mainboard for repair, please put back
this protective cover onto the socket.
6
2. Setting up the mainboard
3. Installation
Step 2
Remove protective cover ( C ) from load plate.
Please do not discard the protective cover.
Always replace the protective cover if the
processor is removed from the socket.
2