VIA P4M800 Pro Guia De Inicio Rapido página 7

3
Step 3
Remove the processor from the protective
cover. Do not touch the bottom of the
processor. The processor cover should not be
discarded. Always replace the processor cover if
the processor is removed from the socket.
The CPU is keyed to prevent incorrect insertion, do not
force the CPU into the socket. If it does not go in easily,
check for mis-orientation.
5
4
Step 4
Hold the processor with thumb and index fingers
as shown. Ensure fingers align to the socket
cutouts ( D ) , processor notches ( E ) align to
socket convexes ( F ). Place the processor
straight down without tilting or sliding in the
socket.
Step 5
Fan Clips
Place the fan heatsink onto the mainboard with
the fasteners align to the holes. Be care not to
damage the thermal interface material attached
to the bottom of the heatsink. Rotate the clips
90 degrees to lock the CPU cooler in place.
Connect the fan cable to the mainboard header
JCPU_FAN.
7