Led Display - Klarstein MONACO Manual De Instrucciones

The unit is equipped with a very useful remote control.
How to insert the remote control batteries
(The batteries are not included in the scope of delivery.)
1. Flip the remote on its side.
2. Press the battery release on the bottom edge of the remote.
3. Grasp the battery socket and pull the battery out.
4. Insert a lithium battery type CR2025.
2
1

LED DISPLAY

LED Display Icons and Values
16 Empty water tank indicator icon
17 Timer setting on/off indicator icon
18 Value of time remaining in timer, Shows values for both the desired relative
humidity and the actual relative humidity
19 Ions on/off! Indicator icon
20 Humidity setting on/off indicator Icon
21 Mist volume indicator (low, medium and high)
CR2025
EN
23