EN
OPERATING INSTRUCTIONS
Before getting started. please remove the SPS-807 from its box and allow it to
become accustomed to the room temperature for at least 30 minutes especially
if the machine is cold from the outside air. The SPS-807 is designed to operate at
temperatures between 5-40 and relative humidity of less than 80%.
To get started, grasp the water tank by the handle at the top and lift from the base.
Next fl ip the tank over and unscrew and remove the water tank lid and filter.
Then place the water tank under the faucet for fi lling' grasping it from the handle
under the water tank. Fill the tank with tap water (or other clean water source with
water temperature under 40 ), re-insert the lid and fi lter Flip the water tank once
again until it is right side up. Ensure that the basin is clean and then carefully place
the water tank back on the lower body.
24