Cleaning And Storage - Klarstein MONACO Manual De Instrucciones

EN
28

CLEANING AND STORAGE

You can ensure many years of trouble free operation of your SPS—807 humidifi er
by following a few simple maintenance procedures. If your water is hard.
containing high concentrations of calcium and other minerals, then over a period
of time white dust will start to deposit on the various surfaces in the room. A
white, film-like substance will also start to develop in the water basin, on the
transducer and on the inner surface of the water tank. This white fi lm will impede
the proper function of the transducer and the operation of the machine.
e recommend the following:
• lf your water is very hard. we recommend that you boil it fi rst allow it to cool
completely before use in the humidifi er. The boiling will reduce the mineral
concentration in the water. The other option is to use distilled water if your
mineral level is still too high.
• lf you are using the machine on a daily basis, clean the transducer, water tank
and basin once a week.
• When the water tank needs a refi ll, empty the remaining water from the tank
and fi ll it with fresh water.
• Clean the whole machine and make sure to keep all the parts completely dry
when the machine is not in use.
How to clean the transducer
How to clean the transducer
1. Place 510 drops of vinegar on the surface of the transducer
and wait for 2-5 minutes.
2. Using a small brush, cotton swab or tooth brush. gently
clean the mineral fi lm from the surface of the transducer.
3. Rinse the transducer with clean water.
4. Never use sharp or solid objects for cleaning the transducer.
How to clean the water basin
1. Clean the water basin with a soft damp cloth. if there is
excess fi lm on the surfaces. then soak
vinegar and repeat the process.
2. If there is a fi lm in any of the depressions along the basin,
drop a bit of vinegar into depression and clean it outwith a brush.
3. Rinse the basin with clean water.
the cloth with