Preparations And Inspection While Beginning The Operation - HOMCOM 821-023V70 Instrucciones De Ensamblaje

Preparations and inspection while beginning the operation

Ensure the tank is installed in position.
If the tank is full or not installed properly, the dehumidifier will not work.
1. Moving the water tank
Hold the sides and pull out.
2. Emptying the water tank
- Pull out the tank from the dehumidifier.
- Slowly empty out the tank.
- Install the tank back into the dehumidifier.
After using the dehumidifier, the
tank may hold water. When the
tank is full, the dehumidifier will
stop working – the indicator will
illuminate.
Note
11