Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
24
•
Lift the cooker hood so that the bracket is above the kitchen cabinet and rests
on it, preventing the cooker hood from falling down.
•
Turn the screw clockwise, as shown in the next figure, to lock the bracket in
place. If you want to loosen the bracket, turn the screws counterclockwise.
•
Use the ST6x40 mm screws to fix the top bracket to the back of the kitchen
cabinet.
•
The ST4x20 mm screws are used to fix the cooker hood to the bracket on the
kitchen cabinet.
Note: The extendable exhaust pipe is not included in the scope of delivery, but
is an optional accessory. Peel off the protective foil before installation.
Publicidad
Tabla de contenido
Solución de problemas
