5.2 Replacement Parts
CAUTION – POSSIBLE EQUIPMENT
DAMAGE: To prevent voiding the
warranty
or
equipment, use only authorized
STERIS replacement parts.
Description
SPRAY NOZZLE, S/S 303, 110°, ASS'Y
(INCLUDES O'RING P117048-907)
O-RING, SILICONE, 3/8" OD X 1/4" ID
PIN, LOCKING, SPRAY ARMS
LOCK, HUB SIDE, SPRAY HEADER
STOPPER, ACCESSORY
NUT, S/S, M6
HOLLOW JET, M6 X 3 X 50mm LG
HOLLOW JET, 4mm X 60mm M6 WITH TOP
HOLLOW JET,4mm X 59mm M6
5-2
10095339
3. Push and turn clockwise to reinstall each end spray nozzle.
4. To clean rack rotary spray arm assemblies, proceed as follows:
5. If necessary, repeat appropriate cleaning procedure for each
To order replacement parts, proceed as follows:
1. Include description and part number as listed in Table 5-1 on
2. Specify model of your rack on your order (Three-level
damaging
the
3. Send your order directly to STERIS.
4. Use only STERIS authorized parts on this equipment. Use of
Table 5-1. Replacement Parts
Operator Manual
a. Remove pin securing rotary spray arm assembly to
accessory.
b. Remove and lower rotary spray arm assembly.
c. Rotate counter clockwise and pull to remove each end spray
jet.
d. Use special tool provided with unit or a fine wire
(approximately wire gauge of a paper clip) to gently clean
sediment from spray jets. Rinse under running water.
e. Push and turn clockwise to reinstall each end spray jet.
f.
Once cleaning procedure is completed, reinstall rotary spray
arm assembly to accessory using previously removed pin.
rotary spray arm assembly on manifold racks.
your order.
Ophthalmic Rack with Removable Upper Insert – Long).
unauthorized parts will void the warranty.
Part Number
10094264
P117048-907
P117914-825
P117049-101
P117049-215
P117056-556
P117076-991
P117077-475
P117077-477
(Continued...)
Routine Maintenance and Replacement Parts