Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

completely dry and place the parts in a dry, sealed container. Ensure that
the spray assembly is completely dried off by the shaking. Otherwise,
the nebulization may not work after reassembling the device.If this is the
case, shake the spray assembly again so that the water can escape. The
nebulizer should then work as normal.

6. Storage and Maintenance

1.Nebulizer Storage
1) Storage conditions:
a. Environment temperature: -20 ℃ ~+55 ℃ ;
b. Relative humidity: ≤80%R.H. Non-condensing state;
c. Atmospheric: 86.0 kPa~106.0 kPa;
d. others: Non-corrosive gas, good ventilation, avoid high temperature,
humidity and direct sunlight.
2) Storage instructions:
a.The device is valid for 5 years in the above mentioned storage
condition.
b.The nebulizer should be promptly cleaned and disinfected after
use, the medication cup and other accessories should store into the
packing box after completely drying. Stored in the required environmental
condition, avoiding impact.
2.Nebulizer Maintenance
1) Normal working conditions
a.Environment temperature: 5 ℃ ~40 ℃ ;
b.Relative humidity: ≤80%R.H. Non-condensing state;
c.Atmospheric pressure: (86.0~106.0) kPa;
d.Power:DC 2.4V (Li-ion battery)or DC5.0V with AC adapter(purchased
by user,technical specification please refer to Chapter 2 for details).
2) Maintenance Instructions:
a.Please use nebulizer under normal conditions.
b.Do not use the nebulizer near the heating device or open flame. Do
not use a microwave oven, fan and other dry nebulizer and accessories.
c.Do not expose the nebulizer and accessories to corrosive liquids and
gases.
d.Do not wrap the power cord around the unit.
e.When using a nebulizer, if any irregularities are encountered, seek a
solution in accordance with Chapter 8.
16

Publicidad

Tabla de contenido
loading

Tabla de contenido