Faq; Replacement Parts - Panasonic ES-LS8A Instrucciones De Funcionamiento

►Removing the outer foil section
Press the foil frame release buttons and
lift the outer foil section upwards.
►Attaching the outer foil section
After turning the foil frame mark (
front, securely attach the outer foil section
to the shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release
buttons and pull down the system
outer foil.
• Do not press the system outer foil
release buttons with excessive
force.
Doing so may bend the system outer foil, preventing
complete attachment to the foil frame.
2. Align the foil frame mark (
mark ( ) and securely attach together until it clicks.
Note
Do not throw away the foil frame.

►Replacement parts

Replacement parts are available at your dealer or
Service Center.
Replacement parts
System outer foil
for ES‑LS8A
16
) to the
) and the system outer foil
WES9600

FAQ

Question
Does this product
require inner blades?
Will the battery
deteriorate if not used
for an extended
period of time?
Can I charge the
shaver after every
use?
Why should the
adaptor be
disconnected after
charge?
What is the constituent
of the dedicated oil?
Why does the
appliance beep twice
after switched off?
Answer
Outer foils and inner blades
are integrated into the
system outer foil.
The battery will deteriorate if
not used for over 6 months,
so make sure to perform a
full charge at least once
every 6 months.
The battery used is a
lithium‑ion, so charging after
every use will have no effect
on battery life.
Charging the battery for more
than 1 hour will not affect
battery performance, but
disconnect the adaptor for
safety and to save energy.
Constituent of the oil is
liquid paraffin.
The sound indicates that the
battery capacity is running
low. Please charge the
appliance.