DCU Tecnologic 34158010 Manual De Usuario página 14

ENG
1.2 Cleaning and management
Follow the below points to ensure that the smartwatch is
operating normally and looks good. Otherwise, maybe the
smartwatch can be damage and cause skin irritation.
• Protect watch from dust, sweat, ink, oil and chemical
products (such as cosmetics, antibacterial sprays, hand
sanitizers, detergents, and insecticides). Otherwise, the
internal and external parts may be damaged or causes
performance degradation. If the smartwatch is stained
with above substances, please clean it with lint-free soft
cloth.
• When cleaning the smartwatch, do not use soap,
detergent, abrasive materials, compressed air, ultrasonic
waves or external heat sources. Otherwise, the smartwatch
may be damaged. Soap, detergent, hand sanitizer, or
detergent residue may cause skin irritation.
• After exercising or sweating, please clean your wrist and
strap. Use water to clean the smartwatch and dip a small
amount of alcohol to wipe, then dry it thoroughly.
• If the smartwatch is stained or infiltrated with other
objects, please use wet soft toothbrush to clean it.
1.3 If you are allergic to material on the smartwatch, please pay
attention when using
• Manufacturer conducted testing about hazardous
materials on the smartwatch by internal and external
certification agency, including testing of all materials
contact skin, skin toxicity testing, and wearing testing.
• the smartwatch contains nickel. If your skin is very
sensitive or you are allergic to the materials on the
smartwatch, please take necessary precautions.
– Nickel: the smartwatch contains a small amount of nickel.
The content is lower than the reference value of European
REACH regulations. You will not be exposed to the nickel
in the smartwatch and our device has passed the
international certification test. However, if you are allergic
to nickel, please use the smartwatch with caution.
• All materials used on the smartwatch comply with
relevant inspection standards such as REACH and RoHS.
14