Selection Of Installation Equipment - universalblue UBE2404-21 Manual De Instrucciones

9. INSTALLATION
Remember that the hob must not be sealed to the kitchen
countertop or any other surface with silicone. If this is done,
the warranty will no longer be valid.

SELECTION OF INSTALLATION EQUIPMENT

1. Cut out the work surface according to the sizes shown in the
drawing. For the purpose of installation and use, a minimum
of 50mm space shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please
select heat-resistant work surface material to avoid larger
deformation caused by the heat radiation from the hotplate. As
shown below:
A B
480 mm 560 mm
C D
50mm 50mm
mini mini
E F
50mm 50mm
mini mini
61