Qilive Q.6467 Manual Del Usuario página 17

4.4 Connecting the Washing Machine
4.4.1 Connecting the Water Supply Hose
Warning!
• To prevent leakage or water damage, follow the instructions in this chapter!
• Do not kink, crush, modify or sever the water inlet hose.
• For models equipped with hot water valve, connect it to a hot water tap with the
hot water supply hose. Energy consumption will decrease automatically for some
programmes.
Connect the inlet pipe as indicated. There are two ways to connect the inlet pipe.
4.4.1.1 Connection between ordinary tap and inlet hose
clamp nut
Loosen clamp nut
and four bolts
4.4.1.2 Connection between screw tap and inlet hose
Tap with threads and inlet hose
Connect the other end of the inlet pipe to the inlet valve at the back of the product and
fasten the pipe tightly clockwise.
water Inlet valve
Tighten clamp nut
water supply hose
17 17
slide bushing
Press slide bushing,
insert inlet hose into
connecting base
Special tap for washing machine
Connection finished
slide bushing
EN