Sangean RCR-30 Manual De Instrucciones página 6

3.
Press and hold the Info / Menu button until you hear a
beep (then release the button) to enter the menu setting.
4.
Rotate the Tuning control knob until the FM AUTO /
MONO setting shows on the display. If the setting is
Auto press the Tuning control button and rotate the
Tuning control knob to switch to Mono mode to reduce
the hiss. Press and release the Tuning control button to
confirm the setting.
5.
To return to Auto (Stereo) mode, press and hold the
Info / Menu button to enter the menu setting. Rotate the
Tuning control knob until the "FM MONO" shows on the
display. Press and release the Tuning control button and
rotate the Tuning control knob to select AUTO. Press and
release the Tuning control button to confirm the setting.
Presetting stations in AM / FM mode
There are 5 preset stations each for AM and FM radio.
They are used in the same way for each frequency band.
(Please note that 9 memory presets for each band can be
accessed via remote control.)
1.
Press the Standby (main power) button to switch on
your radio.
2.
Press the Source button to select the desired frequency
band. Tune to the required radio station as previously
described.
3.
Press and hold the required Preset button until the
display shows "P4" for example after the frequency.
The station will be stored using the preset number .
Repeat this procedure for the remaining presets as you
wish.
4.
Preset stations which have already been stored may
be overwritten by following the above procedure if
required.
Recalling a preset in AM / FM mode
1.
Press the Standby (main power) button to switch on
your radio.
2.
Select the required frequency band by pressing the
Source button.
3.
Momentarily press the required Preset button to have
your radio tune to one of the stations stored in the
preset memory.
NOTE
The display will show "EMPTY" if no station has been
stored to that preset.
Listening to nature or soothing sounds
There are 27 different sounds for the Sound mode. (For
the Sound select button 1 / 2 / 4 / 5, each button has
5 different sounds. The Sound select button 3 has 7
different sounds.)
1.
With your radio switched on, press the Source button
to select the Sound mode.
2.
Press the Sound select button1-5 repeatedly to select
different sounds.
NOTE
When the radio is in the standby mode, pressing the
Sound select button1-5 will turn on the radio and switch
to the corresponding sound.
Sound select
Nature or soothing sounds
button1-5
RAIN DROPS
- 1
STREAM
- 2
OCEAN WAVES
- 3
WATER FLOW
- 4
WHALES
- 5
FROGS
- 1
CICADAS
- 2
WIND
- 3
BIRDS
- 4
BIRDS 2
- 5
WATER DROPS
- 1
BUBBLES
- 2
FIRE CRACKLING
- 3
TRAIN
- 4
WHITE NOISE
- 5
WHITE NOISE 2
- 6
FAN
- 7
SOOTHING SOUNDS
- 1
LULLABY
- 2
PIANO MUSIC
- 3
TWINKLE TWINKLE LITTLE STAR
- 4
PIANO MUSIC 2
- 5
SOOTHING SOUNDS 1
- 1
SOOTHING SOUNDS 2
- 2
GB
F
E
05