Motion BLINDS CM-40 Manual página 30

7 Check direction of rotation tilt
8 Operate the blind with pull
12
Shortly pull and the blind will start tilting. The
8.1
slats will tilt to 0%. Afterwards the slats will
tilt to 100%. If you want to stop the slats from
tilting, pull again to stop the blind. If you don't
stop them from tilting, the slats will rotate
back to 50% and the blind will start to slide to
its end position.
M O TI O N CM - 4 0 D C V E R TIC AL MOT OR
Up
Down
Shortly press the down button to check if the
7.1
blind opens the right way. If the blind moves
the opposite direction, the rotational direction
can be changed.
Use the bluetooth app to change your
7.2
direction.