Motion CM-35 Manual página 9

M O TI O N CM - 3 5 E LE CT RON IC C UR TA IN M O T O R
5 Set closed position
16
Before programming the end positions, program
5.1
mode must be de-activated.
Shortly press the program button to de-activate
program mode. The blind stops stepping and the
end positions can be set.
Press the down button down to automatically
5.2
move the blind to the closed position. Once the
closed position has been reached, the position
Down
is saved.
M O T I O N C M -3 5 E L EC TR ONI C C U R TA I N MOT OR
6 Set open position
Up
6.1
Press the button up to automatically move
the blind to the open position. Once the open
position has been reached, the position is
saved.
17