Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
KCB 240-ST
Battery Crimping Tool
MAINTENANCE AND SERVICING
Damaged equipment may cause serious personal injury. Do not use damaged
equipment. If abnormal noise or vibration occurs, have the problem corrected before
further using.
1.
Before each using, inspect the general condition of the tool. Check for loose screws,
misalignment or binding of moving parts, cracked or broken parts, or any other
condition that may affect its safe operation.
2.
After using, clean external surfaces of the tool with clean, moist, smear the rust
preventing oil on the metal surface of the tool and the dies to avoid rusty. Store the
tool in the dry environment.
3.
Service to the tool should only be done by a qualified Service Technician.
4.
In order to prolong the life of the tool please change the oil per year. Make sure the oil
filtered by 120 mesh net or over 30µm strainer. Meantime avoid the dusty into the oil
cup.
5.
After a long time using, the sealing kits will be damaged, if there is leakage please
contact with the manufacturer and/or the distributor to change the sealing kits.
www.grupotemper.com
Publicidad
Tabla de contenido
Solución de problemas
