limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must
be properly grounded and correspond to the technical details on the product label.
Only use the device in a horizontal position. Do not shake the device.
Disassemble the device and all its components and clean them before the first use.
3.3.
Device use
1. Ground the device housing, use the grounding terminal located on the
back of the griddle.
2. Before connecting the device to the power supply, always check that
the temperature control knob is set to "0".
3. Connect the power cord to a power outlet, The green power lamp will
come on. In models with two hobs, each of them has a separate
power cord, thermal protection and controls.
4. Use the temperature control knob to set the preferred temperature
for the hob to reach. The heating indicator lamp will come on and will
go out after the set temperature is reached. For two hob griddles: the
knob and lamp indicators for the left-hand hob are on the left and for
the right-hand hob on the right. The thermostat will keep the
temperature constant.
Note: When used for the first time, the heating elements may emit a
small amount of smoke.
5. ATTENTION! Use appropriate utensils to put on and take off food to
be grilled. Do not use metal utensils – these may damage the heating
surface.
6. NOTE: After the first heating, the grill may darken more or less
regularly. This is quite normal: the plate is made out of cast iron and
the surface oxidizes.
7. Regularly check the fill level of the collecting drawer to avoid
overfilling it.
8. After using the griddle, set the thermostat to "0" and disconnect the
device from the power supply.