The device is equipped with overheating protection. In the event of a
protection trip, remove the cause and reset the device by removing the
cover and pressing the Reset button located on the back of the appliance.
3.4.
a)
Unplug the mains plug and allow the device to cool completely before each
cleaning, adjustment or replacement of accessories, or if the device is not
being used.
b) Use only non-corrosive cleaners to clean the surface.
c)
Use only mild, food-safe detergents to wash the device.
d) After cleaning the device, all parts should be dried completely before using it
again.
e) Store the unit in a dry, cool place, free from moisture and direct exposure to
sunlight.
f)
Do not spray the device with a water jet or submerge it in water.
g) Do not allow water to get inside the device through vents in the housing of the
device.
h) Clean the vents with a brush and compressed air.
i)
The device must be regularly inspected to check its technical efficiency and
spot any damage.
Plate maintenance:
•
Preserve the hob with unsalted cooking oil by applying it with a
kitchen towel or a cloth. Leave the plate for one hour and then wipe
away the remaining oil with a cloth. The grill plate prepared in the
described way can be used again for grilling.
Cleaning:
After each use, the grill must be thoroughly cleaned:
•
In case of a one-time, short use, simply wipe the grill with a paper
towel.
After a prolonged period of use, you can use a special grill scraper
•
(and/or a sponge or a brush) to collect the remaining food and
remove it to the drain area. After removing the residues, you can dry
Cleaning and maintenance