Airwheel H3TS+ Manual Del Usuario página 7

3.Turn on the main power
After completing the above steps, turn on the power. The main
power switch and charging port are located behind the battery
compartment (Picture3-1).
4.Unfold the wheelchair
Press and hold the up/extension button 1 on the controller for
3 seconds in the off state (as shown in Figure 4-1). When the
controller panel lights up. Release the button when the "Drip"
sound appears, wait for the wheelchair to automatically expand.
After the expansion is completed, press ③ to exit the expansion
and contraction.
Turn on the power switch ④ and start to use (Figure 4-1).
Notes:
If the wheelchair cannot be folded automatically due to a
malfunction of the electrical parts, please use the given tools
to remove the screws located at the rear of the wheelchair (see
Picture 4-2) to fold/unfold it manually.
Charging port
Main power
switch
②
Speed down / Fold
③
Stop folding /
unfolding
- 4 -
3-1
Power
④
Switch
Speed up /
①
Unfold
4-1
Screw
4-2