Control Panel - Argo PURY BABY Instrucciones De Uso

CONTROL PANEL

Power button
Timer button
Wind speed button
Light control button
TURNING ON THE PRODUCT
When connect the appliance to the power socket, the buzzer will ring for 1 second, LED lights on the control panel and on the
light circle will flash for 1 second, then go off.
POWER BUTTON
Touch the Power button to turn on or turn off the appliance.
To turn on the purifier touch the button Power, the buzzer will ring for 1 second to indicate that machine it's on, the default
setting is medium wind speed (MID) and the corresponding LED indicator will be on.
To turn off the purifier touch Power button, the buzzer will ring for 1 second and all lights on control panel will be off.
WIND SPEED BUTTON
In the condition of working, touch the wind speed button, the buzzer will ring for one time, press again to adjust the desired wind
speed among the circulation: SLEEP (low) -> MID (medium) -> HIGH mode with buzzer rings, the corresponding LED
indicators will be on.
In SLEEP mode the corresponding LED indicator will be on for 3 seconds, then go off, lights on control panels and light circle
will be off while the purificator will continue to work in low wind speed (SLEEP). Press any button on control panel to wake up
the light.
TIMER BUTTON
In the condition of working, press the Timer button to set among the circulation (in hours): 2H -> 4H -> 8H -> OFF with buzzer
rings, and the corresponding LED indicator will be on. Press again Timer button, the Timer indicator will be off and the machine
will work continuously without Timer.
After setting the desired switch off time, when the time is up, the purifier will stop to work and lights on control panel will be off.
Touch Timer button and the lights on control panel and on light circle will be on for 3 seconds, then turn off, touch any button on
control panel to wake up the light.
V 05/20 14