Cleaning And Maintenance - Argo PURY BABY Instrucciones De Uso

Ocultar thumbs Ver también para PURY BABY:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

LIGHT CONTROL BUTTON
Touch the light control button and the light circle will be on and will automatically cycle the color between: blue – cyan – green –
yellow – orange – red – purple. To hold the desired color press again the light control button. To deactivate the light circle press
again this button, a buzzer will ring.
Warning
Always pull the air purifier's plug out of the power socket before cleaning it, to prevent electric shocks or
malfunctions.
Warning
Do not wet or immerse the air purifier in water, as this may cause electric shocks.
Use a damp and soft cloth to clean the outer surface of the air purifier.
Do not use solvents, petrol, xylene, talcum powder or brushes to clean the unit: these may damage the surface
or colour of the casing.
Cleaning the casing
Use a damp and soft cloth to clean the outer surface of the appliance.
Do not use excessively hot water, solvents, petrol or other aggressive chemical compounds, talcum powder or brushes:
these may damage the surface or colour of the casing.
Remove stains using lukewarm water with a little neutral detergent.
Do not pour water onto the air purifier to clean it, as this may damage the internal components or cause a short circuit.
Do not drop any water into machine when clean the air outlet.
Cleaning the filter
Clean the filter regularly. Do not wash the filter with water, do not use the vaacum cleaner, just gently clean the filter with
a dry cloth. Sterilize the filter under sunlight regularly.
Replacing the filter
When the lamp rings keeps flashing in red, the filter should be replaced. Contact a service center.
STORAGE
Ensure the machine is power off and unplugged, gently use a soft cloth and neutral cleanser to clean away any dust or
debris from the surface of the machine and air inlet/outlet. After the machine is completely dry, put it on a plastic bag and
place it in a cool and well-ventilated place.
If the appliance has not be not used for long time, turn on the machine for few minutes from time to time to ensure good
performance.
V 05/20

CLEANING AND MAINTENANCE

15

Publicidad

Tabla de contenido
loading

Tabla de contenido