CrissAir CCB 04 G5 Manual De Instrucoes página 22

suitable size for the rated capacity with
a clearance distance which completely
disconnects the power line under
EN
overvoltage category III conditions,
consistently with the rules of installation
(the yellow/green earth wir must not
be interrupted). The plug or omnipolar
switch must be easily reached on the
installed equipment.
To avoid all risk, if the power cable
becomes damaged, it must only be
replaced by the manufacturer, by an
authorised service centre, or by a
1 - CABLE-CLAMP
Adaptation to various types
of gas
proceed as follows:
•
corresponding type of gas to be used
(see table " Uses characteristics")
• to adjust to the minimum, use a
screwdriver on the screw placed on
(butane / propane) screw tight.