Grouw 18224 Manual De Instrucciones página 66

Assembly parts for each step:
Assembling the log saw
Start by opening the packaging and place all
the parts supplied so that you have a good
overview of them.
It takes 2 people to assemble the saw.
Blade guard (Fig. A)
Place back plate 1 (15) against the left side
of the bracket on the cradle so that the two
holes in the back plate are lined up with the
top two holes in the bracket.
Attach back plate 1 to the cradle using an
M8×12 bolt, a washer and a nut.
66
Position blade guard 1 (8) against the bracket
so that the holes are lined up. Attach blade
guard 1 and back plate 1 to the bracket using
three M8×20 bolts, washers and nuts.
Repeat the above steps with back plate 2 (16)
and blade guard 2 (6) on the right side of the
bracket on the cradle.