Replacing The Saw Blade - Grouw 18224 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 107

Replacing the saw blade

NB! The saw blade may only be replaced with
a saw blade with the same specifi cations as
the original.
1. Dismantle the stop plate by removing
the M5×10 screws, spring washers and
washers.
2. Remove the M5 nut and washers from
the protective shield.
3. Remove the split pin and washer from
the guide bar.
4. Remove the M8×50 bolt, washers and
nut holding the chain.
5. Carefully lower the cradle until it rests on
the fl oor.
6. Remove the four M5×10 screws and
washers from the outer blade guard.
GB
73

Publicidad

Tabla de contenido
loading

Tabla de contenido