Waring Commercial BB255E Manual De Instrucciones página 5

SPECIFICATIONS
• Ratings: 220-240 VAC – 50-60Hz – Single Phase
• Motors: permanently lubricated series – wound universal type
• Base: Die-cast with epoxy enamel finish or polished stainless steel.
• Containers: Stainless steel or copolyester.
• Cord: 3-conductor ground cord
• CE Listed
• Operating Cycle: 3 min ON/1 min OFF
BLENDER JAR ASSEMBLY INSTRUCTIONS
1. When assembling blade assembly to
jar, beware of the blades as they are
very sharp.
2. Position rubber seal over blade
assembly so that it sits in between the
flats of the blade assembly and the jar.
3. Insert blade assembly with rubber seal
into the bottom hole of the jar.
NOTE: To avoid leaking while blending,
be sure the rubber seal is positioned in
between the blade assembly and the jar.
HINT: Assembling the jar is easier when
the bottom of the jar is facing up.
4. Screw the collar clockwise onto the
jar until it tightly secures the blade
assembly and seal to the jar.
5