Audizio LUCCA Manual De Instrucciones página 10

Edit your favorite list
On the Favorite list, choose the radio station you want to edit then press the [►] button on the remote control (or press [►]
on the unit). It will enter the Edit menu with the following options:
•
Move down - To move down the ranking of a station
•
Move up - To move up the ranking of a
•
Delete - To delete a particular station
•
Move to top - To move a station to the top of the favorite list
•
Move to bottom - To move a station to the bottom of the favorite list
The device supports UPnP and is DLNA-compatible. This provides the opportunity to stream music from your network.
However, this requires you to have a compatible device in your network that can function as a server. This can be e.g., a
network hard drive or a conventional PC with e.g., Windows 8 via which access to the shared folder or media sharing is
permitted. The folders can then be browsed and played on the radio.
Note: Please make sure your computer laptop is on the same Wi-Fi network as the Radio before you start using this function.
Music streaming
• Once the UPnP/DLNA compatible server is configured to share media files with your radio, you can start streaming music.
• On the home screen, select Media Centre and choose UPnP.
• It may take a few seconds for the radio to complete the scan for available UPnP servers. If no UPnP servers are found, it will
show Empty List.
• After a successful scan is done, select your UPnP server.
• The radio will show the media categories available from the UPnP server, e.g. 'Music', 'Playlists' etc.
• Choose the media files you wish to play. You can set the mode of playback under Configuration > Playback setup.
My Playlist
You can make your own playlist for the UPnP music files. Choose and highlight the song you want to add to playlist, press and
hold the [Scroll/Select] knob or press and hold the [OK] button on remote, until the sign
My playlist.
Clear My Playlist
Remove all songs in "My Playlist" to allow a new playlist to be prepared.
Note: If you have DLNA compatible servers available, follow the steps described above to browse the audio files from DLNA
compatible device on the radio to play.
If there is Digital Audio Broadcasting (DAB) in your area, the Radio can pick up the DAB stations as well (no internet
connection is required). The radio supports both DAB and DAB+.
Place the radio close to the window and extend the antenna as far as it can go to get the best reception. Sometimes you may
need to adjust the direction of the antenna to improve reception.
On the home screen, scroll to DAB Radio or use the [Mode] button on remote to switch to DAB Radio. Press [OK] to start.
It will ask whether you want to Scan DAB Station. Press [Scroll/Select] to start scanning and it will show the progress on the
number of channels received. When it is done, a preset page will be displayed for your action.
You can select the channel and start listening to it. Whenever you want to add to My Favourite, press the
or press and hold the [ ] button on the unit, and it will add to the favourite list.
Press the [◄] button to return to the Preset list.
Note: When a DAB radio is playing, press the [►] button to view more radio information, each time you press the [►] button,
it will display various information at a time such as radio frequency, rolling texts (if available) and big time clock. New digital
radio stations should be picked up automatically by the radio if they are part of a multiplex you already received. Otherwise,
you need to do the Preset Scan again.
To receive the ordinary FM stations (no internet connection is required), place the radio close to the window and extend the
antenna as far as it can go to get the best reception. You may need to adjust the direction of the antenna to improve
reception.
On the home screen, scroll to FM Radio or use the [Mode] button on remote to switch to FM Radio. Press [Scroll/Select] to
start.
It will ask whether you want to Scan FM Station. Confirm to start scanning and it will show the progress on the number of
channels are found. When it is done, it will automatically save the found channels on presets and display the list for your
action.
10
appears. The song will be added to
button on remote