Audizio LUCCA Manual De Instrucciones página 12

To play music from a Micro SD memory card, simply insert a Micro SD card into its port on the front of the radio (with label
side up). Press the [ ] button and navigate to "Micro SD", press [OK] to confirm. It will take a moment to read the Micro SD
card before it can start playing music.
Skip to the next or previous track by rotating the [Scroll/Select] knob. Press and hold the [◄] or [►] buttons will invoke fast
forwarding / rewinding. To pause/play the music, press the [Scroll/Select] knob.
Note: If a Micro SD is not recognized or does not play properly, the list of files on the device is corrupted or a file in the list is
not played, please format the memory card (all the files will be deleted) and try again. The supported file systems are FAT12,
FAT16 and FAT 32. Compatible audio format: Mp3.
• Choose Alarm from the home screen or press the [ ] button on the remote control.
• Select either Alarm 1 or Alarm 2, choose Turn on to activate the Alarm.
• Follow the alarm wizard instructions to set the alarm.
• The wizard will guide you through the settings below:
Time - Set the time for the alarm.
Sound - You can choose Wake to Tone, My Favourite, Wake to FM Radio or Wake to DAB Radio as the alarm source.
Note:
Wake to FM or Wake to DAB Radio - only the preset stations can be used for the radio alarm (if the preset scan has
been completed).
Wake to My Favourite - Preset your favorite station before setting this as the alarm source.
Repeat - You can schedule the alarm as you desire: Everyday, Once or multiple days.
Alarm Volume - Adjust the volume of the alarm as you like by rotating the [Scroll/Select] knob or [▲/▼] button on
remote.
Alarm duration - There are a number of duration choices available. You can set the preferred duration for the alarm
to sound. When the time is due, it will turn off automatically.
• After the above settings are completed, press the [◄] button to exit and make sure the Alarm is turned on. You will see that
the Alarm icon has appeared on the display when activated correctly.
Note: If the selected alarm source is not available, the Wake to Tone alarm will be triggered instead.
Stopping Alarm/Activate the Snooze function
When the alarm goes off, press the [ ] to stop the alarm or press the [Scroll/Select] knob to activate the Snooze feature.
When Snooze is activated, the alarm is muted for 9 minutes and sounds again when the time is due. You can repeat the
process multiple times. To stop the Snooze function, press the [ ].
You can set the timer to let the radio go into standby mode after the selected time elapsed in the range of 15 minutes to 180
minutes. There are several timer options to choose from. Press [
to Sleep Timer in the home screen. You will see the icon appear on the display when the timer is set.
Here you will find the complete settings / options available to configure your own radio. On the home screen, navigate to
Configuration setting. Press [OK] and you will see a list of options available.
Network
•
Network Options
Always on: The WLAN function remains switched on (faster access when switching from other modes of radio).
Auto off in 30s: The WLAN function shuts down after 30 seconds when not in use (to save energy).
] button on the remote control to set the timer or navigate
12