Connections; Connecting The Audio Signal - dB Technologies IS26T Manual De Uso

English

2. CONNECTIONS

CONNECTING THE AUDIO SIGNAL

The connections for audio input and links to other speakers are made via Euroblock (Phoenix) connectors. The
connectors are protected under an panel that can be easily removed by unscrewing the four screws that secure it
to the cabinet.
Connect the audio source (e.g., from an amplifier or another speaker) to the INPUT terminal using the provided
female connectors, respecting the polarity markings next to the connectors (positive to positive, negative to
negative). The audio signal can be linked to another speaker in a similar way: connect the LINK output of the
speaker to the INPUT terminal of the next speaker respecting the polarity (positive to positive, negative to
negative).
AUDIO PARALLEL
SPEAKER
SOURCE
IS26T Cod. 420120377 REV. 1.1
19