3. Insert anchors and screws. (See Figure 3)
NOTE: Do not tighten screws completely until
step 6.
Figure 3
4. Open dispenser and hold up to wall. Align holes
over screws. (See Figure 4) See "Opening" on page 4.
Figure 4
LOADING
1.
Before loading, turn collar of refill counterclockwise
until click is heard. (See Figure 7)
PAGE 2 OF 12
INSTALLATION CONTINUED
5. Lower dispenser onto screws. (See Figure 5)
6. Tighten screws. (See Figure 6)
INSTRUCTIONS
Figure 5
Figure 6
Figure 7
Refill
0522 IH-5807