OPERATING AND MAINTENANCE MANUAL
LKS SERIES SUBMERSIBLE ELECTRIC PUMP
The pump must not be used in the following situations:
•
Temperature of the water to be suctioned > 35 ° C.
•
Dirty water with particles larger than 5 mm.
•
Continuous operation (e.g. fountain pump).
•
Corrosive, easily combustible, aggressive or explosive liquids (such as petrol, petroleum or nitro
thinner), salt water, oils and greases must not be pumped.
Technical specifications:
Power
Max Flow
Pressure
Max. Dep.
Max. Water Temperature
Outlet
Solids
IP
Start point height: ON
Start point height: OFF
3. INSTALATION
Automatic Mode
The float switch (3) switches the pump on
automatically when the water level
exceeds the cut-off height and water is pumped out.
The float switch (3) switches off the pump
again as soon as the water level
drops below the cut-off height.
www.proindecsa.com / proindecsa@proindecsa.com
Model
9
LKS- 500PA
500 W
1200 l/h
Max. 8 m
7 m
35ºC
1-1/4"
5 mm
IPX8/F
75 mm
55 mm
ENG