Vertex Life Katia Manual De Instrucciones página 11

1. Description and purpose of the stove:
VERTEX LIFE solid fuel stoves are designed in a way to enable efficient combustion
of solid fuels with the possibility of adjusting and regulating the amount of input air
required for the combustion process. The stove consists of parts from steel, with
doors and top plate made of cast iron or steel (depending on the model of the
stove), and the grate in the combustion chamber made of cast iron. All stoves are
plated inside with schamotte bricks, which provides long-term heat accumulation.
The stoves are painted with special heat resistant paint. The glass on the door is
the first class heat resistant ceramic glass.
The stoves are designed for space heating of a wide spectrum such as living rooms,
offices, restaurants, schools, garages, warehouses, etc. ..
- Models: DIPLOMAT, HEVIA, KATIA, MOZART and BIGFIRE CERAMIC have sides
coated with ceramic tiles which gives unique atmosphere to your room.
- Models: BIGFIRE and HEVIA
alongside with heating of space, these stove models can be used for baking also
(of different kind of bread, pies, meat, etc..)
2. Installation:
- All local regulations including those refering to national and European standards
needs to be complied with when installing the appliance.
- Place of installation must be horizontal and
capacity, otherwise must be taken appropriate actions to fulfill these conditions.
- The stove must not be placed near combustible materials (such as wooden,
textile or plastic furniture parts, etc..) nor near cooling devices. Minimum distance
between the stove and such materials must be provided according to data from
Table 1.
- if the stove is placed on the floor made from combustible materials (wood, itison,
floor plastic, etc.) it is necessary to protect the floor with metal sheet of min.30cm
width from the sides of the stove, and min. 50cm from the front side of the stove.
Flue pipes must be away from combustible objects min. 40cm.
- The stove should be attached to a chimney with inner radius of at least 120mm
and height of 6m.
- on the place of installation of the stove there must be provided free access for
cleaning of the stove, the flue connectors and the chimney itself.
have oven with built-in thermometer. Thus,
must have adequate carrying
2