Installation; Connections; Wall Mounting - Geemarc AmpliPHOTO50 Manual Del Usuario

Installation

Handset Cord Connection
Insert the coil cord into modular jack located on the left side of the
base. Connect the other end into the modular jack located on the
handset.
Line Cord Connection
Insert the modular plug of the straight cord into the rear side of base
unit, then insert the other end of RJ11C into the telephone wall
socket (*).
(*) Classified TNV-3 according to EN60950 standard.

Wall mounting

Your phone is also designed to be mounted on a wall.
Make 2 holes in the wall , insert the wall plugs and the wall mounting
screws.
The screws should protrude from wall by 6-7 mm.
Place the phone onto the screw-heads and slide down to secure.
Wall mounting
5