Antenna Installation - Simu T3.5EBHZ DC Manual De Instrucciones

COMPATIBLE TRANSMITTERS
1
1 : Wall BHZ transmitters
2 : Mobile BHZ transmitters 1C/5C
i
Compatible with io-homecontrol® transmitter
(Please refer to the corresponding instructions).
Do not position the transmitter near metal in order to
avoid range losses.
INSTALLATION
2
Instructions which must be followed by the drive and home automation professional installing the
drive:
- If the motor is used outdoors, then run the cable in a UV-resistant conduit, e.g. trunking.
- Methods of wiring are given by national standards or IEC 60364 standard.
- Cables which pass through a metal wall must be protected and isolated using a sheath or sleeve.
- The cable for the motor cannot be removed. If it is damaged, return the drive to the After-Sales department.
Recommendations: Keep a minimum distance of 20 cm between two BHZ motors. Keep a minimum distance of
30 cm between BHZ motors and BHZ transmitters. Simu recommends placing the connectors between the end
piece and flange, and fixing the cables inside the roller shutter box. The cables and connectors must be protected
from the roller shutter movement. A radio appliance using the same frequency (868-870 MHz) may deteriorate
our product's performance.
Refer to instruction 5117585/5139459 for solar panel installation.
Refer to instruction 5136806/5144624 for battery installation. Recharge the battery before use
with the charger ref. : 9020638
Drilling of
the tube :
Ø38,2
Mounting:
PLASTITE FXSN7/7X12 ZING JA.
(5005970)

Antenna installation :

The end of the motor antenna wire must be put outside the roller shutter box for at least 10 cm (100 mm) and
must be placed at 1cm (10 mm) from a metallic surface. The antenna wire must not be rolled up or cut.
90°
9027174 (x100)
2/8 EN
Location of the PROG key on BHZ transmitters:
A
3 x ØB /120°
L2
29 L1
IP44
1,2
r = 9 mm min.
10 mm mini
(12 transmitters (1 channel 1W) max. for one motor)
A
C 3 x ØB /120°
D
03/23 • 06/18 • 10/12
Ø4 x 10
STEEL
1
< 10 mm
A ØB C
Ø min.
(mm) (mm) (mm) (mm)
(mm)
37 437 4,2 8
4
3
2
9016635
=
40
D L1 L2
(mm) (mm)
5,5 459 474