Bose VIDEOBAR VB-S Manual De Instrucciones página 48

Problem
Bose Videobar VB‑S
is not listed as a
microphone, speaker,
or camera in my
meeting software.
My meeting software
is displaying a
message that the
video is not working
or cannot start.
When I try to
connect to the VB‑S
using the Bose Work
Configuration WebUI,
my browser displays
a security warning.
TR OUBL ES H O OTI N G
What to Do
Wait approximately 30 seconds for
your computer to register the VB‑S as a
microphone, speaker, and camera device.
If this still does not work, try the following
solutions:
Make sure the USB cable is connected
securely to your computer.
Try connecting to a different USB port on
your computer.
Make sure the VB‑S is powered on
(connected securely to its power outlet).
Make sure the USB cable is connected
securely to the USB‑C port on the rear
panel of the VB‑S.
Try using a shorter USB cable.
If you also own Bose Videobar VB1, make
sure you are not using the USB cable
included with the VB1 to connect the VB‑S
to a computer. (The VB1 USB cable is
designed specifically for that model.)
This is usually caused when the Bose
Work Configuration app or another unified
communications client is already using and
controlling the camera. Close the other app
that is using the video.
This is normal as the VB‑S does not provide
a security certificate based on a dynamically
allocated IP address. See Bose Work
Configuration App and WebUI (Page 24)
for specific instructions. (If you are ever
unsure about performing an operation on your
computer, in a web browser, etc., check with
your IT/system administrator first.)
4 8 E N