MSW Motor Technics MSW-FFI-01 Manual De Instrucciones página 16

the device is being used. There should be at least 10 cm distance between each
side of the device and the wall or other objects. Keep the product away from hot
surfaces. The device should always be used when positioned on an even, stable,
clean, fireproof and dry surface, and be out of the reach of children and persons
with limited mental and sensory functions. Position the device such that you
always have access to the power plug. The power cord connected to the
appliance must be properly grounded and correspond to the technical details on
the product label.
ASSEMBLING THE APPLIANCE
1. The ring
2. Front / rear safety grill
3. Fan blades
4. Castors
5. Support
6. Fan speed switch
7. Motor
8. Power cord
3.3. Device use
1. Connect the device to a power socket.
2.To set the desired tilt angle, loosen the tilt adjustment screw and - using the tilt
lock knob - set the fan to the desired position, then tighten the tilt lock knob
(applies to the MSW-FFI-01 device).
3. Set the desired speed: