8. Use one M6 x 25 mm bolt (10), one washer (14) and one
bushing (15) to connect one long plastic panel hinge (8)
to the middle of the leg on the same side of the
attached small plastic panel bracket. (See Figure 6)
Bushing
M6 x 25 mm Bolt
Long Plastic Panel Hinge
9. Attach the modesty panel (2) to the long plastic
panel hinge (8) and small plastic panel bracket (7)
on one leg. (See Figure 7)
Long Plastic
Figure 7
Panel Hinge
Modesty
Panel
10. Attach the remaining long plastic panel hinge (8)
and small plastic panel bracket (7) to the opposite
side of the modesty panel (2).
11. With these parts attached to the modesty panel,
connect modesty panel following steps 7 and 8.
PAGE 3 OF 12
ASSEMBLY CONTINUED
12. Attach shelf (16) to square metal crossbar (4) using
Figure 6
Small Plastic
13. Assembly is complete. (See Figure 9)
Panel Bracket
four M5 x 12 mm bolts (13). Tighten using Phillips
screwdriver. (See Figure 8)
Figure 8
M5 x 12 mm
Bolts
Figure 9
0221 IH-7775