Rear Panel - FONESTAR ZS-2000M Manual De Instrucciones

EN
Figure 6 Schematic Diagram of the ZS-2000M Sound Source Buttons and State Indicator Lights
1 - Sound source working state indicator light: the light is green when the specified sound source is being
broadcasted.
When the light is flickering green, a sound source has been selected for previewing by the operator
before being broadcast. This function can be set through the software.
If the light is off, the sound source is not working or is not selected..
2 - Sound source selection button: used to select the sound source. When previewing the sound, press
this button a second time to confirm broadcasting.
3 - Sound source fault indicator light: a orange light indicates a sound source fault. For example, the
sound files do not exist or are incorrect.
4 - Sound source description labels: user can write or print sound source names on labels that can be
inserted in the corresponding sound source indentation.

REAR PANEL

1.- Control Interface: connects to the power amplifier. The ZS-2000M outputs audio signals and self-test
signals to the ZS-1500/ ZS-2250/ ZS-4125, and receives the ZS-1500/ ZS-2250/ ZS-4125 fault signals
through the control ports..
2.- REC output: recording output interface (reserved interface) used to connect the external recording
device, only works while local PTT microphone paging.
3.- Auxiliary input: audio input interface used to connect external sound source equipment such as a
CD/DVD player or tuner.
4.- Contact input: 8 contact input ports without supervision.
5.- Contact output: 8 contact output ports
6.- RS-485: communication control port. Used to connect the fire alarm system interface module.
7.- Cooling fan: used to cool down the internal temperature, please don't cover it.
8.- Main fuse: provides over-current protection for the main power supply.
- 12 -