Maytronics Dolphin Nautilus CC Plus w/Wi-Fi Instrucciones De Uso página 8

English
LED Lights
Connectivity LEDs
The connectivity LED light on the power supply has several modes:
1. Flashing blue light - waiting for Bluetooth
blue
2. Steady light - connected via Bluetooth
3. Flashing green light - power supply is connected to your home/pool Wi-Fi® network and trying to connect to the cloud.
4. Steady green light - power supply is now connected to the Wi-Fi® network and to the cloud.
blue green
5. Alternating and
Appear also while using the remote-control.
On/Off LEDs
blue
1. Steady light - Power supply is ON, and the pool cleaner is working.
2. Flashing green light - waiting for the next operation
3. Alternate blue/green/red
Please wait until process is completed.
red
4. Steady light – error. Refer to troubleshooting.
5. Orange light - Filter is clogged up. Please clean the filter.
Tips
• If the app is stuck on the same screen for over 2 minutes, close the app and re-open it.
• To test your Wi-Fi signal strength and quality, play a video via your smart device browser.
®
Power supply On/Off button features:
1. Operating - Press the On/Off button for up to 5 sec.
2. Quick start - This feature activates a specific feature via the power supply.
*In selected models, these features can be changed via the app.
To activate the quick start feature, press and hold the On/Off button for 5 sec.
blue
The light will blink 3 times.
3. Automation mode - This feature allow you to connect to your smart-home.
To activate the automation mode, press and hold the On/Off button for 15 sec.
The blue light will blink 3 times.
connection.
®
® .
light - power supply is connected via Bluetooth® and to the cloud.
lights – program updating remotely.
7