Safety Instructions - Zzipp ZZSPARCOLDM Manual De Ususario

Thanks for purchasing this ZZIPP product, please read this instruction carefully to
understand how to operate the product correctly. Please store this instruction in a safe
place after reading as a reference in the future.

SAFETY INSTRUCTIONS

To reduce the risk of electric shock, do not remove the cover or the side.
Always contact qualified personnel for repairs.
To reduce the risk of fire and electric shock, do not expose the appliance to moisture and
direct contact with liquids.
The machines are designed for an intermittent effect, the maximum duration of the single
effect is 30 seconds, and a good rule of thumb to avoid overheating the machine to allow
time to pass between one effect and the next.
Protect your eyes when operating the machine.
Machine subjected to dangerous voltage, risk of injury from electric shock. Under no
circumstances should you attempt to open the machine or to remove or adjust the
components mounted inside it.
Contact qualified personnel for maintenance. Keep the machine and controller dry and
do not use outdoors on rainy or snowy days. Do not introduce anything into the machine
other than the powder for the effect. Check the installation in order to prevent accidental
impacts with the machine.
WARNING!
Before using the machine, check that the exit hole of the fountain and the fans are free.
The maximum number of machines that can be connected in series using the through
connector is 6 units.
Make sure that the hopper lid is closed while the machine is running, in case of fire of the
compound due to external causes extinguish it using sand.
Store the machine refill powder in a dry and dry place.
Clean the machine after each start in order to prevent breakdowns and always guarantee
optimal operation. Create chains of up to 6 pieces, an excess of machines connected
together can cause damage and in particular cases fire.
For better ventilation and consequent heat dissipation, do not block the air inlet and outlet
fans.
The public and flammable materials must be kept at a minimum distance of 3 meters from
the ZZSPARCOLDM.
Make sure that the light emission emitted by the machine does not come into contact with
any object.
ZZSPARCOLDM
does not produce open flames and is compatible with indoor use.
2