Wireless Remote Control - Zzipp ZZSPARCOLDM Manual De Ususario

WIRELESS REMOTE CONTROL

The machine has an internal receiver for the supplied remote control.
To enable the remote control, just press the red POWER button, the successful
connection will be indicated by the display showing FFF.
Press the ON button to activate the heating of the machine, at this point the HEAT LED
lights up red and the display shows the temperature value of the machine. When it
reaches a value of about 500, the red HEAT LED turns off and lights up in green READY
and the abbreviation FFF appears on the display, this indicates that the machine is ready
to operate.
The machine has a continuous operation of 30 seconds, after which the fountain stops
and it is necessary to press one of the buttons on the remote control to restart it.
6
Red Power Button:
Remote control enable button.
The machine is connected when it displays "FFF" on the
display.
Button 1:
Active fountain with height 1
Button 2:
Active fountain with height 2
Button 3:
Active fountain with height 3
E-stop button:
Emergency stop
Clear powder button:
Press to remove dust residues in the mechanism, press OFF
to stop the process.
Switching off:
Press the red button for 3 sec.