HammerSmith Multitools M32718 Manual De Instrucciones página 8

Ocultar thumbs Ver también para Multitools M32718:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
• Do not over-tighten the attachment. Always make
sure that you can maintain a strong and balanced
stance. This assures better control in unexpected
situations.
• Do not over-estimate your capacities. Make sure
you have a secure stance and balance at all times.
This allows for better control over the device in
unforeseen situations.
• Wear appropriate clothing. Do not wear loose
clothing or jewellery. Make sure that hair, clothing
and gloves cannot become caught in the moving
parts.
4. USE AND CARE OF THE DEVICE
• Use the correct device configuration for the
respective application. A properly configured
device will allow better execution of the task and is
safer for the intended purpose.
• Do not use the device if the on/off switch is not
working correctly. Any device that cannot be
switched on and off with the switch is dangerous
and must be repaired immediately by a specialist
dealer.
• Remove the battery pack from the device before
altering settings, replacing accessories or storing
tools. These safety measures help to avoid the risk
of the device switching itself on unintentionally.
• Maintenance of the device. Make sure that
moving parts are correctly attached, firmly in
place, and free from damage that could impair
the functionality of the device. If the device
is damaged, you must have it repaired by an
authorized dealer.
• Keep the cutting tools clean and fresh. Properly
maintained cutting tools with sharp blades are less
likely to become clogged and are easier to control.
• Use the device and accessories in accordance with
these instructions, taking into account the working
M32718_HammersmithMultitool_Stichsa geaufsatz_Manual_A5_20220629_MM.indd 8
M32718_HammersmithMultitool_Stichsa geaufsatz_Manual_A5_20220629_MM.indd 8
conditions and the task to be performed. Using the
device for work for which it is not intended can lead
to dangerous situations.
• Only ever charge the battery using the charger
provided by the manufacturer.
• A charger designed for a different battery pack can
create a fire hazard if it is used for charging.
• When the battery pack is not in use, keep it away
from other metal objects as these could potentially
short-circuit the poles of the battery. If the poles of
the battery are connected to one another, a fire or
fire may result.
• In the event of improper working and storage
conditions, liquid can escape from the battery.
Avoid this coming into contact with the skin under
all circumstances. If you accidentally come into
contact with the liquid, rinse it off immediately
with water. If the liquid comes into contact with the
eyes, seek medical attention immediately. Liquids
that leak from batteries can cause skin irritation
and burns.
• This device is designed for household and personal
use only.
5. MAINTENANCE
• Do not try to repair the device yourself, and
ensure that repairs are only ever carried out by an
authorized specialist dealer.
• Use only original replacement parts. This
guarantees that the safety of the device is
maintained.
The operation and use are entirely the responsibility
of the user.
ADDITIONAL SAFETY RULES
• Always use protective goggles or glasses.
• Never use the Hammersmith MultiTool if it is wet.
8
20.07.22 11:50
20.07.22 11:50

Publicidad

Tabla de contenido
loading

Tabla de contenido