Warranty Information - ZWIFT HUB Guia De Inicio Rapido

Optional: Using an alternative cassette or freehub
Your Zwift Hub includes a pre-installed cassette and freehub that is Shimano
and SRAM compatible. Want to use a different cassette or freehub? You'll
need a cassette lockring tool and a chain whip.
The Zwift Hub's freehub is hyperglide compatible. If you are installing a
SRAM XD, XDR, or Campagnolo cassette, you will need to install an alternative
freehub body. The stock freehub can be removed with or without the
cassette installed. If you choose to remove the cassette prior to removing
the freehub, remove the drive side adapter with the wrench provided. Slide
off the existing cassette and freehub and follow the installation instructions
provided with your new freehub. Before attaching a cassette, follow the
installation instructions provided with your new cassette and use the
recommended cassette spacer, if required. Secure the cassette tightly on the
freehub. Once in place, re-install the drive side adapter that you removed in
the first step and torque the adapter to 6Nm.
For more tips, visit zwift.com/hub/support
Warning: Over-tightening the drive side adapter may cause damage to the
bearings. If you do not have a torque wrench, your local bike shop should be
able to help.
Manufacturer Name & Address
Zwift Inc.,111 W. Ocean Blvd, Suite 1800, Long Beach, CA 90802
Importer Name & Address
US: Zwift Inc.,111 W. Ocean Blvd, Suite 1800, Long Beach, CA 90802
EU: AR Experts, P.O. Box 5047, 3620 AA Breukelen, The Netherlands
Zwift UK Contact Address
Zwift, Spaces Victoria, 25 Wilton Road, Pimlico, London, SW1V 1LW

Warranty Information

Please see our returns and warranty policy here: zwift.com/hub/warranty
Bluetooth® and ANT+ Radio Transmitters
This device contains Bluetooth® and ANT+ radio transmitters operating in
the 2400 – 2483.5 MHz band with a maximum transmit power of 1 mW.
61